Product Details
Daly Smart BMS 16S 48V 100A 150A 200A 250A 300A LiFePO4 Battery Protection Board
Blast your high-power DIY projects into maximum gear with the Daly Smart 16S 48V (51.2V Nominal) Smart BMS. Engineered for heavy-duty electric drivetrains and high-current power banks, this universal intelligent board supports continuous discharge currents from 100A up to a massive 300A. Equipped with UART & Bluetooth, it lets you monitor your high-voltage battery system directly from your smartphone, with no complex inverter wiring required.
Built For High-Current & Heavy-Duty Drivetrains
- The Ultimate Golf Cart LiFePO4 Upgrade: Perfect for converting Club Car, EZ-GO, or Yamaha carts from heavy lead-acid to lightweight Lithium. Handles high surge currents effortlessly when climbing steep hills.
- Massive 100A - 300A Continuous Output: Designed to supply clean, unrelenting power to high-torque electric motors, DIY Go-Karts, E-Bugvies, electric forklifts, and custom industrial tools.
- Smart Bluetooth Monitoring: Open the Smart BMS App on your phone to instantly view cell voltages, real-time temperature, charging status, and accurate SoC (State of Charge).
- IP65 Weatherproof: Dustproof, mud-proof, and moisture-resistant—perfect for rugged off-road paths or damp marine engine bays.
Technical Specifications (16S 48V Smart BMS)
| Key Technical Parameters | Specification |
|---|---|
| Battery Compatibility | LiFePO4 (Lithium Iron Phosphate) 3.2V Cells |
| Configuration | 16S (16 Cells in Series) |
| Continuous Current Matrix | 100A / 150A / 200A / 250A / 300A Options |
| Connectivity Interfaces | Bluetooth (App) / UART (PC Interface) |
| Active Temperature Control | Heavy-duty aluminum heat dissipating shell + Quiet High-Speed Cooling Fan (for 200A+ models) |
🎯 Top DIY Application Scenarios
Skip the unnecessary complex protocols. This plug-and-play smart BMS is the best choice for:
- Electric Golf Carts: Drop-in lithium conversions for 48V fleet vehicles looking for massive weight reduction and longer range.
- High-Power Go-Karts & E-Scooters: For builders engineering custom high-voltage electric recreational vehicles.
- Budget-Friendly Off-Grid Solar Power: Ideal for simpler 48V solar set-ups paired with standard voltage-controlled/non-communicating hybrid inverters.
💡 Pro-Tip for Golf Cart Builders: High-torque acceleration can cause massive peak current spikes. If your golf cart controller is rated for 250A peak, we highly recommend purchasing the 200A or 250A Daly BMS to prevent nuisance over-current tripping during uphill acceleration.
Key Features
Smart protection. Universal compatibility.
Smart BMS Protection
Over-charge, over-discharge, over-current, short circuit, and temperature protection built in.
Bluetooth Monitoring
Real-time SOC, voltage, current, and temperature data via smartphone app. No LCD needed.
IP66 Water Resistant
Sealed enclosure protects against dust and water splash. Safe for marine and outdoor installations.
Pre-Programmed
Shipped with correct parameters for your cell configuration. Plug and balance -- no laptop required.
Compact Form Factor
Slim profile fits in standard battery enclosures. Clean wiring with clearly labeled terminals.
Active Balancing
Built-in passive balancing extends pack life by keeping cell voltages matched during every charge cycle.
Compatible With
Engineered to work seamlessly with your existing setup.
LiFePO4 Cells
Works with 100Ah–330Ah prismatic cells.
Solar Storage
Pairs with 12V/24V/48V solar charge controllers.
DIY Battery Packs
Drop into your own 12V/24V/48V builds.
Technical Specifications
Full specifications
| Translation missing: en.products.product.specification | Translation missing: en.products.product.detail |
|---|---|
| TEST BMS SPEC | TEST BMS VAL |
| TEST VOLTAGE | TEST 999V |
| TEST BALANCE | TEST Active |
QUESTIONS & ANSWERS
Frequently Asked Questions
TEST BMS Q1 — Can this BMS handle 48V?
TEST BMS A1 — Yes, up to 999V.
TEST BMS Q2 — Does it support Bluetooth?
TEST BMS A2 — Yes, TEST Bluetooth supported.